I have followed the instructions in terms of setting up a connection to Mullvad through my Asustor NAS using Wireguard. Although it’s showing as connected, there’s no valid IP address so it seems I’m not actually connected to Mullvad.
During the setup instructions it asks for the following key information:
INTERFACE:
- Name (MullvadVPN)
- Private Key (Generate Keypair)
- Public Key (it’s generated using the Generate Keypair button above)
- Addresses (I entered the IP address of my NAS)
- DNS Server (1.1.1.1)
PEER:
- Public Key (Got this from the configuration file generated by Mullvad)
- End Point (Got this from the configuration file generated by Mullvad)
Essentially, I took the Public Key generated in the Interface section, headed over to my Mullvad account online, imported that Public Key to then generate a Mullvad Wireguard Key. Chose my geo location and options for the configuration file.
Then when viewing the configure file, I used the ENDPOINT IP address in the configuration file along with the Public Key in the configuration file for the PEER section. What I’m not sure of is where I input the Wireguard Key that was generated.
Any feedback/suggestions on how I can possibly get this up and running properly?